PCB Fabrication And Manufacturing Process

A PCB or Printed Circuit Board is used to electrically connect electronic components. This is done so by etching traces of copper from the board so as to create conductive pathways for circuit connections.

PCB AssemblyA printed circuit board is composed of a conducting layer which is made of thin foils of copper. The insulating layer is laminated with resin (epoxy) prepeg onto a non-conducting surface. The board itself is usually coated with a green solder mask. The mask can also be colored red or blue. You can choose from a number of dielectrics, depending upon your circuit requirements. Manufacturers of electronic products can either do the process of PCB fabrication in-house or contract a third party specialist. PCB is also called Printed Wiring Board or PWB.

Types of Boards

1. Breadboard

This is used in making temporary circuits, usually when trying out a new idea. This board type does not require soldering and all the components may be used again afterwards. It is quite simple to replace the components and change the connections.

2. Stripboard

Stripboard is a permanent type of board. It is soldered and has parallel bands of copper tracks on either side. Stripboards can be cut using a hacksaw or can be simply snapped along the hole lines by placing it on top of the edge of a table and pushing it down hard.

3. Printed Circuit Board

Pcb fabricationPCBs have copper tracks that connect the holes where the electronic components are placed. These boards are specially designed for each circuit. Since the process of PCB fabrication and assembly requires first-rate equipment, it is not recommended for beginners unless the board is already provided.

The Etching Process

Most printed circuit boards are made by putting together layers of copper on the entire substrate, occasionally on both sides. The unwanted copper is then removed by means of mask application and only the required copper traces are left. The etching process is typically done with chemical solutions such as ammonium persulphate, ferric chloride, or hydrochloric acid.

There are different ways to prepare the board prior to the etching process:

1. Direct Draw

You can place a pattern on the board by manually drawing it, an approach called direct draw. You can use a resist pen in drawing your circuit or you can also draw with specialty tapes. Layout the traces of your circuit directly onto the board’s copper surface.

2. Photographic

PCBThis method produces high-quality PCBs quickly, consistently, and efficiently, especially in producing professional board prototypes. In this method, use a resist material to cover the board when exposed to UV light. Create a positive UV-translucent film of your pattern that is opaque where the circuit trace is to be placed, and clear where there is no trace. After making the photo film from your art work, place it on the photo-synthesized board. The light transfers through the clear sections of the film and treats the photo-resist. After that, soak the board in a developer bath where the photo-resist will be removed. The resist that remains will be in the shape of your circuit drawing. The main advantage of this method is its accuracy and neatness of the traces. You can re-use the same film to create additional boards.

Send-out Method

For the development of PCBs for mass production, it is a must to send the data to a board house. This method is slow and costly but the result is topnotch. The PCBs will have a solder mask, fine traces, plated-through holes, and all other amenities.

When sending the files which contain the actual data that will be used to manufacture the boards, it is necessary to comply with the requirements of the board house you are sending it to. The data typically include the drawings for the PCB fabrication and assembly, layout file, and the drill file.

PCB Assembly and Fabrication with www.pcbnet.com

Printed circuit boardsAt www.pcbnet.com, all your PCBA needs are satisfied. Each of our boards, both prototype and production, meet IPC-A-600 F or Class 2 standards. The equipment we use in the assembly and fabrication of the boards are of the highest quality and leading in the market. We employ special applications that can accommodate the challenges of today’s PCB requirements. And with our Full TurnKey quote innovation, you can get your PCB quote within the same day upon request.

TurnKey

PCB fabrication and assembly are made easy with our Instant Online TurnKey quotes. We are first to offer this feature online. You will not need to wait days or weeks to get your PCB quote, with us, you can get it within 24 hours. Simply register on our website, www.pcbnet.com.

Once registered, you can obtain a quote by filling out the quote form or you can send us the following:

• BOM

• Gerber Files or Assembly Drawing

• Pick and Place Data or Centroid

• Desired Quantity and Lead Time

We will contact you shortly and send you the quote within the same day. Is that easy! Click the Get Quotes button now. We’re looking forward to working with you!

The printed circuit boards are one of the most important components in the world of electronics today. Click here www.pcbnet.com you get more knowlege about printed circuit boards.

Custom Military Coins – From Start To Finish

Military coins have been widely used to foster brotherhood, represent unit identity, and recognize excellence. It is also a great way to encourage individuals for their professional, as well as personal accomplishments. Whichever branch of the military services you are in, we can create unique designs for you and make sure your military coins are something each member of your unit can carry with pride.

Military Coins

Our team of talented graphic artists is consistently dependable when it comes to customizing coins of high-quality and distinction. Whether you already have an existing design that you wish to recreate or you want us to make an entirely new one, we can handle it all for you. We offer free artwork and design and will not stop revising until we get the exact design that you want.

Military coins are not just keepsakes, they are a symbol of service, bravery, and integrity of your dedicated men and women. We understand this and as such, we make extensive effort to provide you with the best products and most reliable services.

Free Quote and Artwork

custom challenge coinsSimply fill out our free online quote form and we will contact you within 24 hours regarding your request. Remember, we do not charge for artwork and design and there is absolutely no obligation to buy. If you’re not satisfied with the initial proof we sent you, we can make countless revisions until we get the exact design that you want, at no additional cost. You can also be in touch with us if you want further information. Our friendly customer support team will be more than happy to assist you with all your concerns.

The Coin Designing Process

We have made this process fun, fast and easy! You simply have to:

1. Send us your ideas

We accept drawings, scans, adobe files, images, or even just descriptive paragraphs.

2. Choose your coin shape

We can fashion almost all shapes with no extra fee.

3. Choose a metal style

We offer more than 8 unique metal styles. Choose one that suits the character of your unit.

4. Choose your options

We have a full range of additional options—from special coatings, attachments, effects, packaging and more!

Metal Styles

We offer a wide array of metal styles to suit your specific coin needs. Choose from our free standard options including black nickel, polished brass, polished silver, polished copper and polished gold metal. We also have additional finish options including antique silver, antique brass, antique copper and antique gold. With these several great options, you will surely find one that can perfectly represent your unit.

Coin Shapes

Custom CoinsWith our unique and innovative mold process, we are able to create just about any shape for you at no extra cost. Besides traditional circles, we can shape coins into squares, polygons, stars, emblems/insignias, dog tags, or any unique shape that you want. The custom coin shaping process has become easier and can accommodate more challenging coin requirements.

Additional Options

We aim to deliver the best military coins for your entire unit or department. For this reason, we offer a full range of additional coin options to ensure all your specifications and preferences are met. If you want translucent enamel, sequential numbering, engraved texts, custom cut edges, or any other attachments, we will take care of it.

Here is a list of additional options you can take advantage of:

• Diamond Cut Edges
• 3D Designs
• Epoxy Coating
• Custom Coin Shape
• Coin Cut-outs
• Sequential Numbering
• Keychains
• Bottle Openers
• Offset Digital Print
• Engraved Rim Text
• Velvet Bags
• Velvet Boxes
• PVC Pouches
• Translucent Enamel
• Coin Capsules
• Duo-tone Metal
• Tri-tone Metal
• Antique Finishing Effects
• Custom Inserts

The options are seemingly endless! We understand how highly military coins are valued among all military units and that’s why we endeavor to bring you only the best and nothing else. If you’re looking for other features that aren’t mentioned here, feel free to contact us and we will strive to incorporate other elements that you want for your custom coins.